Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Weil McClain Controller 1013-200 and Outdoor Temp Sensor
bruin64
Member Posts: 2
Hi All,
Last year I replaced my original HEII boiler controller because of intermittent hang-ups- cycling the power would
get it going but that becomes tiresome.
The new controller 1013-200 has a two pin connector that I believes mates with a outdoor temp sensor.
Has anyone tried using the Weil McClain kit 381-356-586 with this new controller on a boiler of this vintage
so the system will adjust the loop temperature based on outdoor temp?
Regards,
Ray
Last year I replaced my original HEII boiler controller because of intermittent hang-ups- cycling the power would
get it going but that becomes tiresome.
The new controller 1013-200 has a two pin connector that I believes mates with a outdoor temp sensor.
Has anyone tried using the Weil McClain kit 381-356-586 with this new controller on a boiler of this vintage
so the system will adjust the loop temperature based on outdoor temp?
Regards,
Ray
0
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements