Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
VIessmann WB2B fault, and i button says Without Function
GW
Member Posts: 4,832
in Gas Heating
This guy's boiler was faulting out, now this morning he says it's working again, anyone seen a wb2b stop working and display Without Function? Normally there's a code! Anyway, we will call Viessmann if need be.
0
Comments
-
Was he playing around with the settings? He have kids that would have touched it? Gremlins?
from the manual:
”Without function” is displayed
Cause: No function is allocated to the key you have
pressed.
Remedy: No action required. Select appropriate key."0 -
don't think the kids got to it, yet there was a fault (he sent me a pic) and he could not get the fault code to show on the display. The system started working and we postponed going there today (too busy anyway)0
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 64 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements