Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Teaching opportunity in NYC
Options
DanHolohan
Member, Moderator, Administrator Posts: 16,540
The General Society of Mechanics and Tradesmen of the City of New York is looking for an instructor to teach at our Mechanics Institute. This is a paid, part-time, evening position.
Evening Classes Begin on Monday September 11, 2017
Classes Meet Two Times A Week
12 Week Semester
For More About The Mechanics Institute: Please Visit www.generalsociety.org
Here's the course we need taught:
EL-201, Introduction to the National Electrical Code
This is an introductory course on the use and interpretation of the National Electrical Code (NEC), Students will learn the purpose and history of the code; develop a working knowledge of the code requirements for wiring, over-current protection, materials and equipment; and be able to discern between wiring methods used in different occupancies, special occupancies, special equipment, special conditions and communication systems, and be able to use the NEC tables to size conduit raceways.
If you're interested and qualified, or know someone who might be, please get in touch with me at dan@heatinghelp.com. I am the Chairman of the School Committee at GSMT.
You'll love this building and its people.
Thanks.
Evening Classes Begin on Monday September 11, 2017
Classes Meet Two Times A Week
12 Week Semester
For More About The Mechanics Institute: Please Visit www.generalsociety.org
Here's the course we need taught:
EL-201, Introduction to the National Electrical Code
This is an introductory course on the use and interpretation of the National Electrical Code (NEC), Students will learn the purpose and history of the code; develop a working knowledge of the code requirements for wiring, over-current protection, materials and equipment; and be able to discern between wiring methods used in different occupancies, special occupancies, special equipment, special conditions and communication systems, and be able to use the NEC tables to size conduit raceways.
If you're interested and qualified, or know someone who might be, please get in touch with me at dan@heatinghelp.com. I am the Chairman of the School Committee at GSMT.
You'll love this building and its people.
Thanks.
Retired and loving it.
0
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 424 Carbon Monoxide Awareness
- 73 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 150 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 850 Plumbing
- 5.8K Radiant Heating
- 372 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 39 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements