Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Weil Mcclain GV4 not firing
Options
redhunter
Member Posts: 1
Sometime yesterday the wife noticed a chill. Did some checking and seen the boiler wont fire. If I turn off thermostat for a minute then turn back up, it will try for a minute or so, shut down momentarily, then try again a couple more times before locking out again. there are 5 led lights. The power light blinks, the tsat circ is lit solid, limit is lit solid, press is not lit at all, and flame is blinking. I have a buddy who puts in new systems for past few years, but isnt really familiar with boilers, coming over after work to look at it. Apparently its a pain in butt trying to find anyone in my area (findlay, NW Ohio) who works on them. All I hear is most places just try to sell you a new one
0
Comments
-
Here's the manual with some troublshooting:
http://www.weil-mclain.com/sites/default/files/field-file/gv-series-4-manual_1.pdfThere was an error rendering this rich post.
0
Categories
- All Categories
- 87.6K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 59 Biomass
- 430 Carbon Monoxide Awareness
- 124 Chimneys & Flues
- 2.2K Domestic Hot Water
- 5.9K Gas Heating
- 120 Geothermal
- 168 Indoor-Air Quality
- 3.8K Oil Heating
- 78 Pipe Deterioration
- 1K Plumbing
- 6.6K Radiant Heating
- 395 Solar
- 16K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 51 Job Opportunities
- 18 Recall Announcements
