Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Copper baseboard idenity

Jeff Perry_3
Jeff Perry_3 Member Posts: 99
Anyone recognize this brand of baseboard from the front cover profile and/or the curved edge of the end cap?

Jeff Perry

Comments

  • mgdesrochers
    mgdesrochers Member Posts: 20
    edited March 2017
    Hayden maybe? Tough to tell just by the cover profile & end cap. Any idea how old it is?
  • kcopp
    kcopp Member Posts: 4,462
    That's too short for Haydon.
    Its either Suntemp or Heatrim American
  • GW
    GW Member Posts: 4,806
    Suntemp?

    Sterling Petite?
    Gary Wilson
    Wilson Services, Inc
    Northampton, MA
    gary@wilsonph.com
  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 16,248
    I think you can rule Sterling out but not sure what it is
  • Jeff Perry_3
    Jeff Perry_3 Member Posts: 99
    Neither Suntemp, Hayden or Heatrim has the rounded edges of the end cap in the picture. It's not Embassy either. I guess there's a good chance that the design has changed over the past 20 to 30 years but I was hoping someone would recognize it. I wanted to buy dummy and replace the covers and end caps that are on missing on 3 or 4 baseboards. But looks like I may have to go through the trouble of doing the entire piece.
  • kcopp
    kcopp Member Posts: 4,462
    Pretty sure its old Suntemp. I installed a bunch 20 years back.
  • Bob Bona_4
    Bob Bona_4 Member Posts: 2,083
    How is the louver attached to the bracket?
  • Steamhead
    Steamhead Member Posts: 17,312
    Slant/Fin?
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting