Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Riello burner locking out

Aaron_in_Maine
Member Posts: 315
in Oil Heating
I have a customer I installed a Biasi B10-3 boiler over a year ago. The issue is every time the power goes out the burner does not start up until someone hits the reset button. Has anyone run into this before I have never seen it. The customer is a snowbird and is very worried about his neighbor having to reset his burner.
0
Comments
-
Bad primary?All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting0 -
I'm not a riello expert, just a normal dude, but getting a new primary control would be my 1st guess.0
-
That was my thought was primary. Just curious if anyone has had this issue before.0
-
Usually controls with a recycle feature shouldn't lock out, but that is with a black out, and not always a brown out. I would suggest a surge protector also0
-
I agree. Maybe the first power failure smoked the primary when the power came back on.
If that's the case, it should be addressed as @billtwocase statessteve0
Categories
- 117.6K All Categories
- 82.8K THE MAIN WALL
- 2.7K A-C, Heat Pumps & Refrigeration
- 43 Biomass
- 403 Carbon Monoxide Awareness
- 8 Chimneys & Flues
- 1.6K Domestic Hot Water
- 4.3K Gas Heating
- 107 Geothermal
- 148 Indoor-Air Quality
- 2.7K Oil Heating
- 45 Pipe Deterioration
- 681 Plumbing
- 4.8K Radiant Heating
- 353 Solar
- 13.3K Strictly Steam
- 2.9K Thermostats and Controls
- 48 Water Quality
- 31 Industry Classes
- 65 Job Opportunities
- 12 Recall Announcements