Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

EGH-115

SOHomeOwner
SOHomeOwner Member Posts: 1
in Strictly Steam
Hi, I'm a new homeowner with somewhat of an understanding of steam heat. Here are a few pictures of my boiler. Wondering if this looks like a decent setup. It has two risers that look like 4" leading into another 4" header. I believe the manual calls for 2 - 2 1/2" risers into a 4" header. PSI is nominal at 0 and the heating in the house (though new air release valves are needed in most if not all of the radiators) is pretty good. Any thoughts, help is appreciated.

Comments

Categories