Favorite Condensate Neutralizer Tank?

BigRob

I like this one, but wow, that's a lot of money:

http://www.supplyhouse.com/Axiom-NT25-NT25-Condensate-Neutralization-Tank?gclid=CjwKEAiAsMXBBRD71KWOh6fcjRwSJAC5CNE1QO14qnDb9vEVxMMNVx9kf76a1zNuxMBfvIDIpQvOjhoCM3zw_wcB

This one isn't bad:

http://www.supplyhouse.com/Noritz-NT20A-Commercial-Condensate-Neutralizer-Kit-for-NRC1111-NRC98-NRC711-NRC661

Way too much for plastic! Any other cost effective options?

SWEI

A couple of DWV tees, a PVC plug/cap, and a rubber cap works.

Leon82

That's how I did mine. Had a bunch of fittings in the basement. Only had to buy the male adapter and cap

EzzyT

@BigRob check them out
http://www.calefactio.com/nouvelles/calefactio-annonce-acquisition-lignes-plomberie-hg-spec/

JohnNY

We make our own out of a 4" clean out tee and 4" threaded plug on the bull, two 2" x ¾" bushings on the run and a few handfuls of marble chips.

BigRob

EzzyT said:

@BigRob check them out

http://www.calefactio.com/nouvelles/calefactio-annonce-acquisition-lignes-plomberie-hg-spec/

Looks good. How much, $300?

EzzyT

Which one are you referring too?

BigRob

EzzyT said:

Which one are you referring too?

The residential CONDENsafe model.

Snowmelt

http://www.discountplumbingoutlet.com/axiom-industries-limited-nc-1-flue-gas-condensate-neutralizer-kit/?gclid=CPHb3e_EuNACFY5LDQod0AgOFg
thats the one I use

Snowmelt

i did like what bob posted but I wasn't able to find it online

john p_2

I used the new SaniFlow condensate pump with built in acid neutralizer and have had no issues...at first I thought it was alittle loud but it 's not bad at all.

BigRob

Now that is some hydronic porn right there.. I like the zone valves and ecm's.

john p_2

Thanks Bob....Will be X-rated once quarry tile floors and lighting are completed!

Solid_Fuel_Man

@john p wow, I zoomed and went cross eyed for 20 min looking at that.....and I thought I was a bit OCD with my installs where "money and time are no object".

Beautiful work!

Taylor

john p_2

Taylor thanks....not bad for an out of work pipefitter, huh?!

Henry

We go to the dollar store and by a "Rubbermaid" box with a lid. We install two bulkhead fittings and fill it with terrazzo. Cheaper than anything out there and NO Xmas 11pm service calls due to a blocked neutraliser.

john p_2

Agreed, the Rubbermaid box works but after spending all the time and money I have on my system there is no way I was going to install a homemade device. I also love the idea of the condensate pump and neutralizing material as an all in one device....... Kinda reminds me of an ad I saw for motorcycle helmets..." If you have a $10 head, then wear a $10 helmet!" ....they meant for safety but you get the point.