Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

KHN install pics

keyote Member Posts: 659
edited December 2017 in Radiant Heating
Hey guys just got the pics up but stupidly posted them in gas heating instead here where you all helped me so much i know most of you are all over this site but just in case id move the post but dont really know how and am tired.
anyway its got water in the indirect and the main loop and the cellar zone i hooked to the old abandoned finntube for ballast. I want to run the indirect for a bit first to flush anything out before filling the top floor loops.
so nows the time to tear me a new one if i need to change anything theres still some time. its wired except i need a 4 pin molex? connector for the LWCO into boiler control panel. i have the pumps on the boiler control and the tstats and zonevalves on the taco panel but im wondering will it start the pump before zone valve is all the way open.