Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Taco ZVC404 wired with ZR/ZC
exheatingguy
Member Posts: 9
Hello all, I am replacing an Argo AZ-4CP (burnt out) with a Taco ZVC404. My confusion is wiring an incoming ZR/ZC for priority controlled elsewhere. There was a spot on wiring block on the Argo, but inexpensive Taco complicated matters for me. I checked Taco's website and video instructions but still not sure, any help would be appreciated.
Thank you
Thank you
0
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 915 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements