Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Electric Radiant retrofit - what's best?
Options
Matt_Connolly
Member Posts: 14
Looking at a 270 sf room with access below. House is all electric, so no hydronic option. Looking at 25 - 30 BTU per sf. Who has experience with electric, I'm assuming there's a spreader plate involved, the obvious radiant insulation, and controls. It will be one zone. There's decking (it's a sunroom), a subfloor, backer board and tile. Key will be to insulate underneath as part of it is exposed to the outdoors. I've done many hydronic systems and a few electric between the backer and the tile, but never one like this. Any help would be appreciated!
Matt
Matt
0
Comments
-
Check out www.heatmyfloors.com. Ask for Dennis. We definitely have a solution0
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 418 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 847 Plumbing
- 5.8K Radiant Heating
- 371 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 38 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements