Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
CO detector
Paul S_3
Member Posts: 1,286
Carbon monoxide detector with boiler interlock.....i cannot seem to locate this control.....supply houses by me dont know what it is ......i believe its a new code in NYC....thanks
ASM Mechanical Company
Located in Staten Island NY
Servicing all 5 boroughs of NYC.
347-692-4777
ASMMECHANICALCORP@GMAIL.COM
ASMHVACNYC.COM
https://heatinghelp.com/find-a-contractor/detail/asm-mechanical-company
Located in Staten Island NY
Servicing all 5 boroughs of NYC.
347-692-4777
ASMMECHANICALCORP@GMAIL.COM
ASMHVACNYC.COM
https://heatinghelp.com/find-a-contractor/detail/asm-mechanical-company
0
Comments
-
Hi Paul,
I have the Kidde KN-COP-IC CO detector in my boiler room.
http://www.kidde.com/home-safety/en/us/products/fire-safety/co-alarms/kn-cop-ic/
Looks like this would tie in nicely.
http://www.kidde.com/utcfs/ws-384/Assets/Sheet_Relay Modules.pdf
My TT Prestige Solo 110 has terminals for an alarm bell but don't think it accepts a lockout signal. put in series with LWCO?
margTriangle Tube Prestige Solo 110 with Trimax Controls (3x oversized)
950 sqft of WarmBoard on 3 floors, 5 loops acting as one zone0 -
There is a thread on it here:
http://forum.heatinghelp.com/discussion/150605/carbon-monoxide-smoke-alarm-interlock0
Categories
- All Categories
- 86.5K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 423 Carbon Monoxide Awareness
- 96 Chimneys & Flues
- 2K Domestic Hot Water
- 5.5K Gas Heating
- 101 Geothermal
- 156 Indoor-Air Quality
- 3.5K Oil Heating
- 64 Pipe Deterioration
- 928 Plumbing
- 6.1K Radiant Heating
- 384 Solar
- 15.1K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements