Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Milwaukee M12 press tool
Dave19
Member Posts: 28
I've read it in many places, but has anyone here successfully used Ridgid pex jaws in a Milwaukee M12 press tool? Apparently Milwaukee doesn't make them. I've seen this claim that they are compatible on several sites.
0
Comments
-
I'm case anybody is wondering....a Ridgid compact jaw will work in a Milwaukee M12.
1 -
https://www.milwaukeetool.com/~/media/CFBB2C89DD8A409183D50A0E4FC8147E.ashx shows the Viega PEX Press jaws, but unfortunately lacks any info on the F1807 jaws.0
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 104 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 159 Indoor-Air Quality
- 3.6K Oil Heating
- 69 Pipe Deterioration
- 942 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements