Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Garage mechanical room

Options
EzzyT
EzzyT Member Posts: 1,295
edited August 2016 in THE MAIN WALL
Not the my usual set up for a mechanical room but my friend asked me to help out on a project that he needed to get completed, since he doesn't trust his own guys to do the work by themselves granted there only 2-3 year apprentices and he couldn't really be there to do the work. Plus try to teach his guys something. Choice of materials and products were out of my hands, I just piped away. Still of course have to go back and finish things up.
E-Travis Mechanical LLC
Etravismechanical@gmail.com
201-887-8856
Bob Bona_4njtommySWEIPaul S_3GordyCanucker

Comments

  • njtommy
    njtommy Member Posts: 1,105
    Options
    Looks great.
  • STEVEusaPA
    STEVEusaPA Member Posts: 6,505
    Options
    That's some perfect soldering!

    There was an error rendering this rich post.

  • Paul S_3
    Paul S_3 Member Posts: 1,261
    Options
    nice job @EzzyT
    ASM Mechanical Company
    Located in Staten Island NY
    Servicing all 5 boroughs of NYC.
    347-692-4777
    ASMMECHANICALCORP@GMAIL.COM
    ASMHVACNYC.COM
    https://heatinghelp.com/find-a-contractor/detail/asm-mechanical-company
  • EzzyT
    EzzyT Member Posts: 1,295
    Options
    Thanks guys
    E-Travis Mechanical LLC
    Etravismechanical@gmail.com
    201-887-8856
  • hot_rod
    hot_rod Member Posts: 22,158
    Options
    You make it look Ezzy. No scorched wood!
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • EzzyT
    EzzyT Member Posts: 1,295
    Options
    Thanks
    E-Travis Mechanical LLC
    Etravismechanical@gmail.com
    201-887-8856
  • Solid_Fuel_Man
    Solid_Fuel_Man Member Posts: 2,646
    Options
    Nice clean install. There must be some serious hot water demands to have two on demands piped in parallel.

    TS
    Serving Northern Maine HVAC & Controls. I burn wood, it smells good!
  • EzzyT
    EzzyT Member Posts: 1,295
    Options
    31/2 baths, 2 kitchen sinks, washing machine with slip sink, master bathroom has a jacuzzi and shower with body sprays
    E-Travis Mechanical LLC
    Etravismechanical@gmail.com
    201-887-8856
  • Alan (California Radiant) Forbes
    Alan (California Radiant) Forbes Member Posts: 4,006
    Options
    Beautiful workmanship! Great soldering!
    The only thing I don't like are the dielectric unions coming out of the Navien and no by-pass around the fill valve for air purging. But still: a thing of beauty.
    8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour

    Two btu per sq ft for degree difference for a slab

Categories