Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Uponor vs Heatlink
Dobber
Member Posts: 91
Massive news in the Canadian plumbing and hydronic industry. I have used both products for years. I'm not sure how big Heatlink is in the states. If you have quoted jobs then get hold of your wholesaler and find out your options.
http://www.edmontonjournal.com/business/cnw/release.html?rkey=20160321C4625&filter=5599&__lsa=3298-df34
http://www.edmontonjournal.com/business/cnw/release.html?rkey=20160321C4625&filter=5599&__lsa=3298-df34
There was an error rendering this rich post.
0
Comments
-
Interesting. Uponor must be hurting. There are quite a few pex-a products on the market now that are less expensive.0
-
Interesting. I looked up the '376 patent and read the claims. It seems to be all about the vertical IR mechanism (but not the IR itself.)0
-
-
0
Categories
- All Categories
- 86.5K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 423 Carbon Monoxide Awareness
- 96 Chimneys & Flues
- 2K Domestic Hot Water
- 5.5K Gas Heating
- 101 Geothermal
- 157 Indoor-Air Quality
- 3.5K Oil Heating
- 64 Pipe Deterioration
- 928 Plumbing
- 6.1K Radiant Heating
- 384 Solar
- 15.2K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 42 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements