Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
HB Smith G300 - diagrams, spec sheets, replacement grill assembly?
Nelson_H
Member Posts: 1
I have an old G300 S/W 12 and the front and rear "grills" have rusted and gotten out of alignment, so that the steel burner tubes are not properly held in place. I see in an old discussion (from this forum in 2004) that cut sheets for this boiler were provided by Yvon Blais, but that was a while ago. Does anyone have them?
0
Categories
- All Categories
- 86.5K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 423 Carbon Monoxide Awareness
- 96 Chimneys & Flues
- 2K Domestic Hot Water
- 5.5K Gas Heating
- 101 Geothermal
- 157 Indoor-Air Quality
- 3.5K Oil Heating
- 64 Pipe Deterioration
- 928 Plumbing
- 6.1K Radiant Heating
- 384 Solar
- 15.2K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 42 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements