Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Blower motor issue
ardner
Member Posts: 0
in Gas Heating
I have a Lennox G50uh-090-07 furnace was working great right up to last night. I have seen the diagnostic light show a "primary or secondary limit switch open". I believe the issue is my blower motor will not spin. My combustion fan starts, the gas ignitor glows and the solenoid for the gas opens an the burners fire. this lasts for about one minute and then the furnace shuts down. Never does the main house fan spin.
I have went to the thermostat and lowered the temp and placed the fan from auto to "ON" to see if I can get the fan to turn and it does not. Are there any steps I need to try before replacing the fan?
I have went to the thermostat and lowered the temp and placed the fan from auto to "ON" to see if I can get the fan to turn and it does not. Are there any steps I need to try before replacing the fan?
0
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 917 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements