Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Copper Convectors (Alum/Zinc Finned) currently setup for 1-pipe steam

BurntFingers
Member Posts: 38
I have a couple of copper convector radiators loose and in the basement (one is about 48 to 49 inches long, 4 inch depth; and the other is significantly smaller but 4 inch depth). They are setup for 1-pipe steam as-is. I am not sure what it would take to convert to Hot Water (where I think they truly belong) or if it's even possible, but would be glad to send pics to anyone interested in them. No leaks or problems when removed recently.
Free to a Good Home (used, not scrapped) in Norther NJ area.
Free to a Good Home (used, not scrapped) in Norther NJ area.
0
Comments
-
Any pics?0
Categories
- All Categories
- 86.9K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 110 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 105 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 978 Plumbing
- 6.3K Radiant Heating
- 387 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements