Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Burnham Alpine Boiler Display Screen
Options
skisk8r
Member Posts: 2
My Burnham Alpine boiler was installed in 2010 Alpine ALP 150. I noticed that the display screen is not functioning. The display is frozen. The furnace is operating properly but the display is not changing or updating as the furnace operates. The display screen is lit up, but the touch screen does not respond due to it being frozen. Wire connections to the display and the main unit seem to be tight.
1
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 418 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 847 Plumbing
- 5.8K Radiant Heating
- 371 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 38 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements