Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Weil McLain CGi3, high limit
Jimbo_5
Member Posts: 222
I have 2 CGi3 boilers that, to me, seem to be running too hot. With a digital thermometer I get a reading of over 220° at supply. The unit-mounted guage reads very high but I am unsure of their 37-year-old accuracy. What should the limit be set at? Thanks
0
Comments
-
Jim
I would think 180 would be hot enough ? Depending on the system emitters0 -
There is about 60' of fintube, 3/4".0
Categories
- All Categories
- 86K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 420 Carbon Monoxide Awareness
- 80 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.3K Gas Heating
- 96 Geothermal
- 154 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 891 Plumbing
- 5.9K Radiant Heating
- 378 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 52 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements