Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Slenderized rad upper tap plug removal fem thread damage

Options
wcs5050
wcs5050 Member Posts: 166
edited January 2016 in THE MAIN WALL
What do you all use to fill in light saw damage to the female threads? It will be connected to water.

Comments

  • Pumpguy
    Pumpguy Member Posts: 781
    Can you post a picture, or give a description of the type of damage you have?
    Dennis Pataki. Former Service Manager and Heating Pump Product Manager for Nash Engineering Company. Phone: 1-888 853 9963
    Website: www.nashjenningspumps.com

    The first step in solving any problem is TO IDENTIFY THE PROBLEM.
  • SWEI
    SWEI Member Posts: 7,348
    Anaerobic threadlockers work quite well for this. Loctite 565, 567, 245, and a few others.
  • wcs5050
    wcs5050 Member Posts: 166
    Thanks guys. Threads are good. Factory plug had much less meat than I thought it would. Barely touched it. Will just go cold chisel and hammer next time.

Categories