Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Short two-pipe for two small Runtals off pre-existing monoflow branch
wcs5050
Member Posts: 137
Disgusting crawlspace accessed by 1'x3' old bulkhead window. Would love to minimize time spent in it.
Does anyone see why this might not work? ...other than having too long a run on one. If distance from division tee is the same, the pressure differential should be the same, and flow will be equal. Should probably just do another monoflow set for second element.
Does anyone see why this might not work? ...other than having too long a run on one. If distance from division tee is the same, the pressure differential should be the same, and flow will be equal. Should probably just do another monoflow set for second element.
0
Categories
- All Categories
- 86.5K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 423 Carbon Monoxide Awareness
- 96 Chimneys & Flues
- 2K Domestic Hot Water
- 5.5K Gas Heating
- 101 Geothermal
- 157 Indoor-Air Quality
- 3.5K Oil Heating
- 64 Pipe Deterioration
- 928 Plumbing
- 6.1K Radiant Heating
- 384 Solar
- 15.2K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 42 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements