Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Cleaver Brooks Flame Safegard Control
Bill_69
Member Posts: 12
Model is FLX-700-210-15. Boiler locks out prior to start. There is a light on the safeguard control on the far right that looks like a flame. This light is on when boiler locks out. As far as I can tell, all pre- start safeties are good. I'm wondering if anyone knows what this light is telling me, and if anyone knows where I can start from this point. The only thing I haven't dug into yet, is the condition of the hi fire/lo fire switches in the firing control actuator. The actuator does have power, and I also found out that the control locks out even if the burner control switch is off. I swapped out the safeguard control with the boiler next to it, and had the same results. Thanks for the help in advance.
0
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 104 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 159 Indoor-Air Quality
- 3.6K Oil Heating
- 68 Pipe Deterioration
- 940 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements