Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Beckett oil inlet

overpop
overpop Member Posts: 52
in Oil Heating
On the oil pump there are 2 inlets. I have a single pipe system, can I use either inlet? Thanks...

Comments

  • spoon22
    spoon22 Member Posts: 32
    Yes for Sigler pipe you can use either the bottom inlet or the front inlet. Just make sure you don't use the return and bypass port on the bottom
    Bob Bona_4
  • Bob Bona_4
    Bob Bona_4 Member Posts: 2,083
    If you use the bottom inlet, take out the front one and seal it and Re install, if you're dealing with Suntec. They seem to leave that one "looser" from the factory as its the more used one of the two. It'll save you a callback
    spoon22

Categories