Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Two-pipe reverse return
danlin
Member Posts: 15
Hi, I'm putting in a hot water baseboard zone with 7 baseboards, all 3/4 copper piping doing a two-pipe reverse return. There's also a toe-kick in the kitchen with 1/2 copper piping. My question is, can I put that toe-kick on a supply line with a mono-flow tee, or should I just put it in as all the rest of baseboards? I'm not using any TRV's. Thanks!
0
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 104 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 159 Indoor-Air Quality
- 3.6K Oil Heating
- 68 Pipe Deterioration
- 940 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements