Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Arrow t25

kcopp
kcopp Member Posts: 4,472
in THE MAIN WALL
I have had a couple of these staple guns. After a year or so they stop working...not necessarily jammed (no staples caught) just will not staple T-stat wire any more. Any hints to resurrect this?
ty,kcopp

Comments

  • SWEI
    SWEI Member Posts: 7,356
    These things have very sensitive noses. Slam them into the end of a toolbox or let them land on their noses from less than a foot and the business end gets out of whack.
  • kcopp
    kcopp Member Posts: 4,472
    good point. I have been pretty careful.... What do others use to secure t-stat wire to studs and the like?
    kcopp
  • SWEI
    SWEI Member Posts: 7,356
    I've been using these for the past 20 years or so. Slower (you have to squeeze twice) but they hold quite solidly while nearly eliminating wire breaks & pinches. Telecrafter also repairs and rebuilds the clip guns.

Categories