Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Poly B x Pex tees

Options
kcopp
kcopp Member Posts: 4,665
edited March 2015 in THE MAIN WALL
I am told they are not making these any more....

http://www.siouxchief.com/products/supply/specialized-supply/astm-f1380-polybutylene/directionals/tees

Anyone have an idea where I can get several 3/4" x1/2" PB x pex tees?

I would rather not do Sharkbite fittings

Comments

  • Hilly
    Hilly Member Posts: 429
    I used to see PB x Pex fittings at homedepot, bag would come with a PB ring too. I believe a Mil3 pex crimper could do PB too. I may get corrected on that last sentence though.
    PB never came around my parts so only the big box stores would have the fittings. I think they hard more barbs to them and closer spacing between each as compared to the f1807 pex fitting.
  • hot_rod
    hot_rod Member Posts: 27,352
    How many do you need? Another option is buy a copper reducing tee and sweat in the various adapters. I think you can still find PB to sweat adapters, same as pex.
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • kcopp
    kcopp Member Posts: 4,665
    I need 4. I have been thinking about getting the sweat male adapters and doing just that w/ the tees. ..ty.kcopp

Categories