Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
EDR capacity for 3/4 wet return
Danny Scully
Member Posts: 1,433
Is there an EDR capacity for a 3/4 wet return? I'm going to be dripping 3 runouts which can all be 3/4 and I was wondering if I could make the wet return for these drips 3/4. It's in my house so I'm being lazy because I have a 3/4 connection open on the wet return now ☺️
0
Comments
-
I'm guessing about 550. Tables I've seen only go to 1"0
Categories
- All Categories
- 85.9K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 420 Carbon Monoxide Awareness
- 79 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.3K Gas Heating
- 95 Geothermal
- 154 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 887 Plumbing
- 5.9K Radiant Heating
- 378 Solar
- 14.6K Strictly Steam
- 3.2K Thermostats and Controls
- 52 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements