Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Z Valve to a ZVC

mastercraft
Member Posts: 24
I'm trying to find a schematic to wire Honneywell zone valves V8043F to a Taco ZVC..any help would be appreciated.
0
Comments
-
#1 of the ZVC goes to TR on the zone valve (motor)
#2 of the ZVC goes to TH on the zone valve (motor)
#'s 3 and 4 of the ZVC go to the end switch of zone valve.Steve Minnich0 -
Detail from Taco's Wiring Guide which can be downloaded from their website.Steve Minnich0
Categories
- All Categories
- 86.9K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 109 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 105 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 975 Plumbing
- 6.3K Radiant Heating
- 386 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements