Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Chilipepper recirculation pumps.
Options

Alan (California Radiant) Forbes
Member Posts: 4,509
in Plumbing
Have any of you had experience with these recirculation pumps. I'm used to using Metlund systems, but they are quite pricey and these Chilipepper ones sure are affordable.
http://www.chilipeppersales.com/chilipepper-appliance/chilipepper-model-cp8000/
A friend of mine used one in his house and he's happy with it, but it's only been a few months now.
Alan
http://www.chilipeppersales.com/chilipepper-appliance/chilipepper-model-cp8000/
A friend of mine used one in his house and he's happy with it, but it's only been a few months now.
Alan
8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour
Two btu per sq ft for degree difference for a slab
Two btu per sq ft for degree difference for a slab
0
Comments
-
Never used one, just the B&G eco/autocirc. They look a bit different from what I remember a few years back?0
-
Wonder if it is listed to the no-lead standard? Looks like some brass components?Bob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream0
Categories
- All Categories
- 87K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 116 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 109 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 987 Plumbing
- 6.3K Radiant Heating
- 389 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 48 Job Opportunities
- 18 Recall Announcements