Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Cast iron radiators available
ddyson15
Member Posts: 5
I have 12 from steam heat system. Located in NJ, 30 minutes from Philadelphia. Any interest? Thanks.
0
Comments
-
Some pictures and descriptions with sizes would be good. Hate to hear about a system being ripped out, but hopefully those rads can be saved.0
-
Are there any wall-hung? If so what size, , two-pipe, do you have the valves and spuds, etc. thanks.Two-pipe Trane vaporvacuum system; 1466 edr
Twinned, staged Slantfin TR50s piped into 4" header with Riello G400 burners; 240K lead, 200K lag Btus. Controlled by Taco Relay and Honeywell RTH6580WF0 -
Sorry for delay... Thought I'd get email notification on comments. System was single pipe. No wall mount, all floor. I'll share pictures shortly. Sizes vary, also have most shutoff valves and some vents still attached.0
-
Are these for sale, or free for pick up? If free, I can stop by to take them.0
-
-
Oh gawd.....I would love to have those tall ones.....too far away from me 8-(0
-
If any of these are still for sale, I am interested. We have put an addition on an old Victorian and are looking high and low for a radiator that makes sense in the house. We can come this week.
-Gwen0 -
These are still available and free, please email ddyson15@comcast.net thank you!!0
-
I sent you an email. Let me know if you don't get it.0
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements