Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
TACO 007 Stainless Steel for steam hot water loop?
Options
nycpa
Member Posts: 108
<a href="http://www.supplyhouse.com/Taco-007-SF5-007-Stainless-Steel-Circulator-1-25-HP-15054000-p">http://www.supplyhouse.com/Taco-007-SF5-007-Stainless-Steel-Circulator-1-25-HP-15054000-p</a>
Would this stainless steel pump be adequate to run a hot water loop off a steam boiler? About 30 feet of baseboard and 100 ft of total piping
Would this stainless steel pump be adequate to run a hot water loop off a steam boiler? About 30 feet of baseboard and 100 ft of total piping
0
Comments
-
Probably wouldn't last
since it uses the boiler water to lubricate the bearings. Though they cost more, we always use bronze 3-piece circs for this, since they are oil-lubricated. These may also have gone to stainless steel by now, been a while since I looked.All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting0 -
thanks
Thanks for your help0
Categories
- All Categories
- 85.8K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 51 Biomass
- 419 Carbon Monoxide Awareness
- 76 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 93 Geothermal
- 151 Indoor-Air Quality
- 3.3K Oil Heating
- 59 Pipe Deterioration
- 864 Plumbing
- 5.8K Radiant Heating
- 375 Solar
- 14.6K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 40 Industry Classes
- 47 Job Opportunities
- 16 Recall Announcements