Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Lochinvar cascade to Modbus changeover

vpelleri
Member Posts: 1
I have a project where I've been hired to change 3 Lochinvar Amour boilers from cascade control to Modbus through a Tridium Jace. I've installed the Modbus cards and changed the setup in the boilers as per Lochinvar's MODB-I-O manual. Double checked addresses and baud rates. I have another Modbus device on the network that is communicating, but I can't get any response from the boilers. Even through a direct connect to a boiler my Modbus network analyzer software can't get a response.
Any help would be appreciated.
Thanks!
Any help would be appreciated.
Thanks!
0
Categories
- All Categories
- 87K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 58 Biomass
- 426 Carbon Monoxide Awareness
- 113 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 109 Geothermal
- 161 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 994 Plumbing
- 6.3K Radiant Heating
- 391 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 55 Water Quality
- 44 Industry Classes
- 48 Job Opportunities
- 18 Recall Announcements