Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
ulrtra series 3 question
smc
Member Posts: 18
wonder if anyone has experiance with ultra series 3 locking out after power outages. have to go into contractor menu turn pumps on and reset priorities.
i suspect a clean power problem the series two they came up with a time delay. not supposed to need on this series. thinking about isoaltion relay or upc back up like use on computer. Any ideas let me know thanks
i suspect a clean power problem the series two they came up with a time delay. not supposed to need on this series. thinking about isoaltion relay or upc back up like use on computer. Any ideas let me know thanks
0
Categories
- All Categories
- 86.9K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 110 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 106 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 978 Plumbing
- 6.3K Radiant Heating
- 387 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements