Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Ever seen this rad?

GW
GW Member Posts: 4,605
in THE MAIN WALL
Looks kind of cool, yes? I've never seen one of these. 
Gary Wilson
Wilson Services, Inc
Northampton, MA
[email protected]

Comments

  • Steamhead
    Steamhead Member Posts: 15,992
    That's a new one on me

    can you get a close-up of the valve?
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • GW
    GW Member Posts: 4,605
    don't know

    I quoted an ac install, if/when i go back i will!
    Gary Wilson
    Wilson Services, Inc
    Northampton, MA
    [email protected]
  • GW
    GW Member Posts: 4,605
    BTW

    this is HW, there is no valve that i can see
    Gary Wilson
    Wilson Services, Inc
    Northampton, MA
    [email protected]
  • Alan (California Radiant) Forbes
    Alan (California Radiant) Forbes Member Posts: 3,615
    If you can,

    see if there is the name of the manufacturer somewhere on the radiator.
    8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hourTwo btu/ per sq ft for degree difference for a slab
  • RobG
    RobG Member Posts: 1,850
    edited June 2014
    Original?

    Is the rad original to the house or installed for aesthetics during the renovation. Obviously the system has been re-piped. I would sure love to see the name on it as well.

    That union looks like hell, they should have installed a spud at the top.



    ,JMHO'



    Rob
  • GW
    GW Member Posts: 4,605
    Ok

    I will search for a name if/when I go back!!!!!!!!!!!!!!
    Gary Wilson
    Wilson Services, Inc
    Northampton, MA
    [email protected]

Categories