Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Automag zone valve with intermittent run-away heat

GW
GW Member Posts: 4,832
in THE MAIN WALL
I don't really work with the Automag at all, yet we have a new customer that is explaining that two or three times this past winter it went on run away craze and overheated. He is saying two years ago the head was replaced but not the body (seems normal enough), so maybe there's some sticking going on? Thanks for any advice. Gary
Gary Wilson
Wilson Services, Inc
Northampton, MA
gary@wilsonph.com

Comments

  • CMadatMe
    CMadatMe Member Posts: 3,086
    Call Hydronic Alternatives

    Gary call Paul Ross up at Hydronic Alternatives, they rep Auto Mag 413-543-8733

    There was an error rendering this rich post.

  • Sam81
    Sam81 Member Posts: 37
    Auto mag

    My experience with them was that a lot of time the little screen in there is dirty that keeps the valve diaphragm from closing properly, in my situation I had to swap the whole valve out
  • GW
    GW Member Posts: 4,832
    Thanks for the comments

    -
    Gary Wilson
    Wilson Services, Inc
    Northampton, MA
    gary@wilsonph.com

Categories