Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Weil-McLain & Caleffi Installation

JohnNY
JohnNY Member Posts: 3,150
in THE MAIN WALL
This is a hard installation to photograph but you get the idea.



We're happy with this one.



It's a large Manhattan residence with three WM 310 boilers and two 80-gallon indirects.



I know, I know. It's a lot of heat and hot water, but this is how it goes in this town.
Contact John "JohnNY" Cataneo, NYC Master Plumber, Lic 1784
Consulting
Plumbing in NYC or in NJ.
Take his class.

Comments

  • SWEI
    SWEI Member Posts: 7,356
    Tight quarters

    looks like a nice installation.
  • Snowmelt
    Snowmelt Member Posts: 1,387
    Hall of fame

    Ever post on hall of fame hvac
  • JohnNY
    JohnNY Member Posts: 3,150
    Nope.

    I don't even know what that is.

    I'll take a look though.

    Thanks!
    Contact John "JohnNY" Cataneo, NYC Master Plumber, Lic 1784
    Consulting
    Plumbing in NYC or in NJ.
    Take his class.
  • icesailor
    icesailor Member Posts: 7,265
    Links:

    Here's a link to HVAC-Talk to the Wall of Pride.

    Scroll down to the very first post and click on each individual JPEG.

    Check out the one about "How's My Brazing" for a real Piping Picasso.



    http://hvac-talk.com/vbb/showthread.php?1494431-Viessman-boiler-project
  • JStar
    JStar Member Posts: 2,752
    Nice

    If somebody took the insulation off, would the solder joints still look perfect as always?
  • JohnNY
    JohnNY Member Posts: 3,150
    That's a nice comment, Joe. Thanks.

    Actually this was mostly a pro-press job.
    Contact John "JohnNY" Cataneo, NYC Master Plumber, Lic 1784
    Consulting
    Plumbing in NYC or in NJ.
    Take his class.
  • RobG
    RobG Member Posts: 1,850
    Beautiful Work

    Beautiful work! As usual, the mechanical room was an afterthought to the architect. Is there even room to replace the equipment down the road?

    Rob
  • heatpro02920
    heatpro02920 Member Posts: 991
    Very nice as always...

    I wish my customers had pockets like yours, I am going to move to NY, lol...



    I did a job with 4 alpines and they were in a "tunnel" like that, so I tilted them at an angle so you had a little more room to work on them...
  • hot_rod
    hot_rod Member Posts: 19,281
    Sweet!

    keep up the great work.
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream

Categories