Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Probe Type Level Switches

Pumpguy
Pumpguy Member Posts: 693
in Strictly Steam
Has anyone had any experience using probe type level switches in lieu of the common float switch to start and stop a condensate pump? 



Any experience, good or bad, as well as brand and other specific information would be greatly appreciated.
Dennis Pataki. Former Service Manager and Heating Pump Product Manager for Nash Engineering Company. Phone: 1-888 853 9963
Website: www.nashjenningspumps.com

The first step in solving any problem is TO IDENTIFY THE PROBLEM.

Comments

  • nicholas bonham-carter
    nicholas bonham-carter Member Posts: 8,578
    Probe type level switches

    These switches have been used for a slightly different purpose by Gerry Gill, and Steve Pajek for their steam mini tube system as a pressure control. They may have some experiences to relate.--NBC
  • Pumpguy
    Pumpguy Member Posts: 693
    Thanks,

    I'll try to contact them off board,
    Dennis Pataki. Former Service Manager and Heating Pump Product Manager for Nash Engineering Company. Phone: 1-888 853 9963
    Website: www.nashjenningspumps.com

    The first step in solving any problem is TO IDENTIFY THE PROBLEM.

Categories