Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Ken Secor's contact info?????
Mad Dog_2
Member Posts: 7,502
Hey you'll...I have lost touch with Ken a few years back and no one seems to have any info on him. While youre at it...how about Supply House Rick? Thanks guys. Mad Dog
0
Comments
-
Ken Secor:
If Ken Secor is the guy that worked in the heating sales industry in New Jersey and retired to the lower Northeast Kingdom of Vermont, halfway between Colchester and the Canadian Border, I remember that he had issues with his circulatory pumping equipment, was mending, and I never heard from him again.0 -
Ken
These are old notes I have for Ken:
"Ken Secor; palmer.heating@verizon.net; Go to ThePiers.net. He hangs out over there."
and
Ken Secor, CEO
Palmer Heating, LLC
1044 Elm Terrace
Rahway, NJ 07065
USA
(732) 388-1794=phone
(732) 388-4632=fax
Sorry, nothing for Rick.8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour
Two btu per sq ft for degree difference for a slab0 -
google his name
in VT, and you'll see twitter posts from a few days back.Bob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream0 -
SOmeone:
I guess that it was someone else.0 -
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements