Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Steam Radiators
SUPPLY_NEW_ENGLAND
Member Posts: 1
Hello..Looking for help in sizing these radiators. Anyone know the Sq Ft of radiation per section? I can work out the BTUs from that info.
Units are about 8 1/2" deep. 34" and 36" high.
Units are about 8 1/2" deep. 34" and 36" high.
0
Comments
-
Those are real beauties
Italian Flue radiators, made by American Radiator Co.
If you deal in radiators, you should get Dan's book "E.D.R.". This has ratings for almost every radiator type ever made, including those Italian Flue units.All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting0
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 917 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements