Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Walter
Options
taz
Member Posts: 13
I have a Weil McLain cg boiler that has pilot and the entropic igniter is constantly sparking. It has a mercury flame senser on the gas valve. Is this senser not working to allow the gas valve to open fully?
0
Comments
-
Boiler not firing
Do you have the installation manual for your boiler(also available online)? It will contain some diagnostic procedures to follow in order to find the source of the problem.
Probably the pilot orifice has become blocked, and without the pilot lighting, the gas valve will not open.--NBC0 -
Boiler
I have pilot...... Not main gas to burners...0
This discussion has been closed.
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 73 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 129 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 61 Pipe Deterioration
- 884 Plumbing
- 5.9K Radiant Heating
- 376 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 59 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements