Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Steam Boiler Piping Kits

Options
SWEI
SWEI Member Posts: 7,356
in Strictly Steam
Just noticed these <a href="http://www.crownboiler.com/Products/Accessories/Piping_Kits">http://www.crownboiler.com/Products/Accessories/Piping_Kits</a>

Not sure how long Crown has been doing this, but I believe it's worth a small bit of applause.

Comments

  • nicholas bonham-carter
    nicholas bonham-carter Member Posts: 8,578
    Options
    Applause

    I wonder why other boiler manufacturers don't offer kits like that.

    It may be a trick of perspective, but the spacing between the second riser and the equalizes looks a bit tight for a second take for a second main.--NBC
  • SWEI
    SWEI Member Posts: 7,356
    Options
    Probably is too short for that

    but pointing a homeowner at one of these and saying "insist on it" will likely get them a better install (from a random plumber or HVAC company, which seem to be the source of so much grief here.)
  • ChrisJ
    ChrisJ Member Posts: 15,735
    Options
    Burnham

    I thought I recall Burnham offering a piping kit as well when I was looking through V8 series stuff. Perhaps I'm mistaken though.
    Single pipe quasi-vapor system. Typical operating pressure 0.14 - 0.43 oz. EcoSteam ES-20 Advanced Control for Residential Steam boilers. Rectorseal Steamaster water treatment
This discussion has been closed.

Categories