Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Mapping an existing heating system?

Dan_G
Member Posts: 32
I have a HWBB system powered by a Munchkin 80M and have easy access to the boiler and all the pumps. However, I have no idea where the PEX is running or which tube/fin units are in what sequence.
Any insight how to trace the system layout?
Any insight how to trace the system layout?
There was an error rendering this rich post.
0
Comments
-
Some pics would help
us to see more of what's going on.
Do you have a basement with exposed piping, or what can you see? If most of the piping is buried in walls/ceilings that you can't access, you might not be able to do much more than educated guesses...0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 104 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 158 Indoor-Air Quality
- 3.5K Oil Heating
- 68 Pipe Deterioration
- 938 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements