Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
B&G comforttrol zone valve fails to operate manually
hhsam
Member Posts: 1
We have hydronic heating system in our condo building. The condo was closed last winter. Now, the heat is not working.
Bleeding the pipes didn't help. Took off the power head of the comfort-trol zone valve. The pin of the seal gland was stuck in the down position. Took it off, moved the pin to up position, still no heat. Anybody familiar with these zone valves? Any way to know if the valve is opening, without draining the pipes?
A neighbor on the same floor has too much heat and we have none. Could it be something wrong with the circulator downstairs?
Bleeding the pipes didn't help. Took off the power head of the comfort-trol zone valve. The pin of the seal gland was stuck in the down position. Took it off, moved the pin to up position, still no heat. Anybody familiar with these zone valves? Any way to know if the valve is opening, without draining the pipes?
A neighbor on the same floor has too much heat and we have none. Could it be something wrong with the circulator downstairs?
0
This discussion has been closed.
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 88 Chimneys & Flues
- 2K Domestic Hot Water
- 5.3K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 910 Plumbing
- 6K Radiant Heating
- 380 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements