Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Trane Vent
KPR
Member Posts: 1
I'm trying to find out how to get a Trane vent replaced (photos attached), water is sperting out of it at the top of it. I was told I have a 2 pipe steam vacuum system. Is there a supply house that may carry it, or a local shop I can order one from. I live in northern NJ and I'd like to keep the original parts if possible.
It's about 7 1/4'' x 3 7/16'' looks like its made out of brass.
It's about 7 1/4'' x 3 7/16'' looks like its made out of brass.
0
Comments
-
Vent
Odds are that there's a more serious reason for the vent spitting water. Is it a lot of water or little drops? I would recommend keeping the Trane vent out of the system and installing modern Gorton #2 vents.
Any pictures of the boiler and piping?0
This discussion has been closed.
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 89 Chimneys & Flues
- 2K Domestic Hot Water
- 5.3K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 910 Plumbing
- 6K Radiant Heating
- 380 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements