Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Please Steam Experts..Switching Oil burner to gas burner on W.McLain 478 Boiler ?

Athana
Athana Member Posts: 105
in Strictly Steam
Dear Steam Experts,

The newer W.McLain EGH 85 (350,000 btu)..gas fired Steam boiler is not really very efficient 81%. Which I think is similar to the W.McLain 478 Oil fired one we have(400,000) now. It is a little oversized..maybe.. : )

Does it make sense to change the entire boiler..or simply do a gas burner on the boiler we have?

In future oil may go back down to less than gas..who knows...

Any first hand experience? Thanks

Comments

  • Steamhead
    Steamhead Member Posts: 17,384
    I'd simply

    convert that 4-78 to gas. When the time comes to replace it, you could probably use the gas burner on a 4-80 which is the current version. 
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
This discussion has been closed.

Categories