Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
3/4" gas pip reduces to 1/2" pipe and gas turned off
pmazza
Member Posts: 1
Help! Our gas company came to turn our gas on after we turned it off while traveling. They will not turn it on as they indicate our hot water heater line reduces to 1/2" and we must change it to a proper 3/4" line.
Our hot water heater will only accept a 1/2" line and that is pretty standard. Can we not go from a 3/4" pipe to a 1/2" pipe for our hot water heater?
Our hot water heater will only accept a 1/2" line and that is pretty standard. Can we not go from a 3/4" pipe to a 1/2" pipe for our hot water heater?
0
Comments
-
Gas pipe sizing
depends on the BTU rating of the appliance and the length of pipe between the appliance and the meter. If there are other appliances (stove, oven, etc.) hooked up it gets a tad more complex.
More info about your system?0
This discussion has been closed.
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 913 Plumbing
- 6K Radiant Heating
- 380 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements