Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
compressor and wiring - where is oil pressure switch?
elfie
Member Posts: 266
here is photo of compressor and wiring
is it possible to see where oil pressure switch is and connection status?
thanks
is it possible to see where oil pressure switch is and connection status?
thanks
0
Comments
-
OPS
Trace out the wires from the wiring diagram! Is this the system w/ the broken capillary? Why is the smaller SealTite dangling? This system has a "hi-leg" ?0 -
question
what is the sealtite? and what do you mean by 'hi-leg'?0 -
Elfie
You are getting a bit out of your league here. I would suggest calling in a pro if this is urgent.
If you want to continue in this direction. I would suggest you look into a basic HVAC course at your local community college or trade school.0 -
This content has been removed.
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements