Welcome! Here are the website rules, as well as some tips for using this forum. 
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website.  Thanks!
Fujitsu concealed unit
                
                    drhvac                
                
                    Member Posts: 190                
            
                        
            
                    Never put one of these in, but it will work best for this job I'm doing, a small bedroon - bath addition. Directions say to keep the esp. between 0 - .36. There is no blower performance charts that come with the unit, so how do I size the duct work? I guess just go in the middle with using .20 as a starting ASP. and see where that takes me? Anybody have eperience with these units?                
                0                
            Comments
- 
            Register
At Fujitsugeneral.com and all the tech data is available to you.0 
This discussion has been closed.
            Categories
- All Categories
 - 87.2K THE MAIN WALL
 - 3.2K A-C, Heat Pumps & Refrigeration
 - 59 Biomass
 - 427 Carbon Monoxide Awareness
 - 118 Chimneys & Flues
 - 2.1K Domestic Hot Water
 - 5.7K Gas Heating
 - 113 Geothermal
 - 164 Indoor-Air Quality
 - 3.7K Oil Heating
 - 73 Pipe Deterioration
 - 1K Plumbing
 - 6.4K Radiant Heating
 - 393 Solar
 - 15.5K Strictly Steam
 - 3.4K Thermostats and Controls
 - 56 Water Quality
 - 51 Industry Classes
 - 49 Job Opportunities
 - 18 Recall Announcements