Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
need EDR of Radiator

USA498
Member Posts: 45
Below is a picture of a radiator for which I would like to confirm the edr of. I came up with 3.2 sq/ft per section for a total of 48 sq/ft EDR. It is 23" tall 8" wide 3 Column 15 sections. Am I Correct in my calculation ?
Many Thanks !
Many Thanks !
0
Comments
-
That's what...
the table says and my calculator comes up with the same thing.0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 104 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 158 Indoor-Air Quality
- 3.5K Oil Heating
- 68 Pipe Deterioration
- 938 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements